MEGA-GLASS COATING
Club M korea "The best car glass coating suppliers"

MEGA SHIELD, The Leader of Car Nano Ceramic Coating

There are various car glass coats in the world, and those car glass coats have a big problem. It is weak durability. MEGA SHIELD is totally different from other car coats in matters of technology. MEGA SHIELD is applied patented formula as advanced technology & nanotechnology, MEGA SHIELD is developed by *KAIST.
(KAIST: Korea Advanced Institute of Science and Technology)

The strong advantage of MEGA-SHIELD with Nano ceramic coating

1. Build strong coating film
2. Convenient application
3. Very polished performance without stain
4. UV protection
5. Scratch resistance
6. Anti-fouling effect & provide easy clean function
7. Ability to delay every stains
8. Ability to super hydrophobic
9. Strong durability
10. Long lasting

MEGA SHIELD is the world best Nano Ceramic Coating

MEGA SHIELD has strong durability with long lasting incomparable to other premier car glass coat, MEGA SHIELD is real glass coat for car protection.
Fundamentally, MEGA SHIELD has all ability of glass coat and each ability of MEGA SHIELD are upgraded maximum value. Nano-particle of MEGA SHIELD permeates a car surface and it make a strong glass coat film to protect car paint.
To make the best use of Nano ceramic coating technology, it must be added premier base material but too many Nano ceramic coat are applied low quality material to provide coats with cheap price, that is why we can see many low quality Nano ceramic car glass coat.
Of course, MEGA SHIELD added high quality base material. It is the largest point of difference of MEGA SHIELD, so MEGA SHIELD has advanced abilities of car glass coat.
MEGA SHIELD rejects comparison with low quality Nano ceramic coat.
MEGA SHILED will be excellent selection for your car.

(Video Clip)



nano car ceramic coating online

M1 overview

By utilizing its nano-sized particles and forming a very thin coating layer on automotive clear coating, this coating agent can improve antifouling performance, promote a stable binding between the automotive clear coating and the superhydrophobic coating, and enhance the durability.
Nano Ceramic Coating
Applicable areas
Automotive clear coating , Nano Ceramic Coating

Characteristics

Unlike other coating agents, it contains over 95% of solid content and does not need to be repeatedly applied. (Just a single application is enough.) In particular, it has been certified as 9H hardness by SGS, provides deep gloss and maximum antifouling performance, and works as a primer between automotive clear coating and finish coating.

Ceramic Coating Packaging

– Exterior glass container
– Flash point: N/A
– Volume 30ml

Coverage
Apply on the entire area of the vehicle (200Cm * 200Cm). Larger application area may be required due to weather conditions such as temperature and humidity.

Durability
;Under normal conditions, the coating with single application can last 48 months, and no additional application is necessary.
(Based on a shampoo car wash once every 10 days)

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

Dry time
;Natural drying – 12 hours after the application in room temperature
Heating system – one hour in 60°C

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

car ceramic coating online

M2 overview

This coating agent enables its nano-sized fluoride particles to penetrate and form a thin coating layer on automotive clear coating as well as provides easy clean.
Nano Ceramic Coating

Characteristics

By combining fluoride and polysilazane, it has maximum scratch resistance and easy-clean features with at least 105 degrees and up to 120 degrees of water repelling angle.

Applicable areas

Automotive clear coating / Glass / Wheels / Tires / Fabrics / Headlamps / Plastics

Coverage

Apply on the entire area of the vehicle (50Cm*50Cm). Larger application area may be required due to weather conditions such as temperature and humidity.

Durability

Under normal conditions, the coating with single application can last 12 months, and additional application is necessary.
(Based on a shampoo car wash once every 10 days)

Dry time

Natural drying – 30 minutes after the application in room temperature
Heating system – 10 minutes in 60°C

Ceramic Coating Packaging

– Exterior glass container
– Flash point: N/A
– Volume 30ml

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

M3 overview

This coating agent enables its nano-sized particles to penetrate and form a coating layer on automotive clear coating and maximizes gloss as well as chemical resistance.
Nano Ceramic Coating
Applicable areas
Automotive clear coating / Headlamps / Plastics

Characteristics

Unlike other coating agents, it has nano-sized coating agent with excellent chemical resistance, which requires no repeated applications. (Just a single application is enough.) With its latest
technology (nanotechnology), it provides deep gloss and maximum antifouling performance and works as a primer between automotive clear coating and finish coating.

Coverage

Apply on the entire area of the vehicle (30Cm*30Cm) and wipe off excessive agent within 5 seconds after application.
Larger application area or longer time may be required due to weather conditions such as temperature and humidity.

Durability

Under normal conditions, the coating with single application can last 60 months, and no additional application is necessary.
(Based on a shampoo car wash once every 10 days)

Dry time

;Natural drying – 8 hours after the application in room temperature
Heating system – 1 hour in 60°C

Ceramic Coating Packaging

– Exterior glass container
– Flash point: N/A
– Volume 30ml

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

PLUS COATing overview

It has two different liquid coating agents (main component and hardener), and enables its nano-sized particles to deeply penetrate and form a strong coating layer. This coating agent has maximized gloss, durability, chemical resistance, and antifouling performance.
Nano Ceramic Coating
Applicable areas
; Automotive clear coating / Headlamps / Plastics

Characteristics
; It has nano-sized coating agent with excellent chemical resistance and is believed to form the strongest coating layer among all other current coating agents.
Unlike other coating agents, it requires no repeated applications. (Just a single application is enough.) With its latest technology (nanotechnology), it provides deep gloss and maximum antifouling performance as well as works as a primer between automotive clear coating and finish coating.

Coverage
; Apply on the entire area of the vehicle (300Cm*300Cm), and larger application area may be required due to weather conditions such as temperature and humidity.

Durability
; Under normal conditions, the coating with single application can last 84 months, and additional application is necessary.
(Based on a shampoo car wash in every 10 days)

Dry time
; Natural drying – 15 hours after the application in room temperature
Heating system – 1 hour in 60°C

Ceramic Coating Packaging

– Exterior glass container
– Flash point: N/A
– Volume 40ml

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

Bodyguard coat overview

This coating agent forms a thin coating layer on the surface of automotive clear coating and has a strong water repellency as well as deep gloss.

Applicable areas
Automotive clear coating / Glass / Wheels / Tires / Fabrics / Headlamps / Plastics

Characteristics
It contains self-glass-layer coating agent, designed to be easily used by everyone, and has deep colors, maximized scratch resistance, and easy clean features with at least 95 degrees and up to 110 degrees of water repelling angle. Especially, it forms stronger coating layers as you apply additional coatings.

Coverage
Apply on the entire area of the vehicle. Larger application area may be required due to weather conditions such as temperature and humidity.

Durability
Under normal conditions, the coating with single application can last 3 months, and additional application is necessary.
(Based on a shampoo car wash once every 10 days)

Dry time
Natural drying – 1 hour after the application in room temperature
Heating system – 15 minutes in 60°C

Packaging
– Exterior glass container
– Flash point: N/A
– Volume 190ml

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

[Glass guard overview]
It has nano-sized coating agent and forms a very fine penetrating coating layer on glass, providing excellent chemical resistance and durability. With this coating agent, a clear glass that can easily get dirty and smudged can be protected by applying silicon (poly-dimethylsiloxane), which is known to
be extremely less or not harmful for human body, and promoting penetrating, bonding, and forming coating layer on the glass surface. Also, it can be stored for a long period of time by charging it into the spray can and blocking air.
This coating agent gives a unique low surface energy on the surface, preventing adhesion of contamination or decreasing the amount of water and detergent required to wash off or remove dirt and contaminations on the surface. Especially, it gives excellent gloss and helps maintain great appearance after the application.
Nano Ceramic Coating
Applicable area
Glass

Characteristics
Unlike other existing water-repellent glass coating agents, it focuses on not only water-repellent function but also antifouling performance. Its excellent easy-clean feature brings about strong superhydrophobic effects. And, it is designed to prevent spots or smudges on the glass.
In addition, it is designed to not be problematic even if the coating agent is deposited on the painted surface.

Coverage
It can easily be applied by anyone. After spraying, just wipe with a dry towel.

Durability
;Under normal conditions, the coating with single application can last 18 months, and no additional application is necessary.
(Based on a shampoo car wash once every 10 days)
In particular, it enables you to easily remove dead insects on the glass after driving and causes no problem when cleaned with a powerful detergent because of the strong chemical resistance feature of the coating layer.
It was successfully tested with 5 million times of windshield wiper operations.

Dry time
;Natural drying – 15 minutes after the application in room temperature
Heating system – 10 minutes in 60°C

Packaging
– Exterior glass container
– Flash point: N/A
– Volume — ml

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

coating or smudge. In such a case, however, re-apply the same agent on the smudged area and wipe off excessive agent with a soft towel.
When the stain is not removed easily, it can be removed by applying steam.

[Wheel guard overview]
By utilizing its nano-sized particles and forming a very thin coating layer on automotive wheel, this coating agent can improve antifouling performance, promote a stable binding between the automotive wheel and the superhydrophobic coating, and enhance the durability.
Nano Ceramic Coating
Applicable areas
Automotive wheel

Characteristics
By utilize polysilazane, it has maximum scratch resistance and easy-clean features with at least 100 degrees and up to 110 degrees of water repelling angle.

Packaging
– Exterior glass container
– Flash point: N/A
– Volume 100ml

Coverage
Apply on the entire wheel area once only.

Durability
;Under normal conditions, the coating with single application can last 8 months, and no additional application is necessary.

(Based on a shampoo car wash once every 10 days)

Preparation for application
Clean the surface to be coated and keep it dry.
After removing oil, dust, and other contaminants, mix IPA alcohol with water (1:3) to ensure the adhesion of the coating and its permeability, and wipe the surface to be coated just before the application.
Lastly, use an appropriate tape to cover the areas that should not make contact with the agent.

Dry time
;Natural drying – 12 hours after the application in room temperature
Heating system – one hour in 60°C

How to store
1. Store in a cool and dry place
2. After opening, seal it tight for reuse
3. Keep out of reach of children

Caution
1. Never use it on human body.
2. Do not use in locations where a fire or flame is used.

3. If it makes contact with eyes or skin, immediately clean it off.
4. Do not use in enclosed areas.
5. Keep out of reach of children.
6. Do not use for other purposes.
7. If you drink or inhale the contents, immediately follow doctor’s instructions.

Application guideline
Please clean the surface completely.
The surface temperature tolerance range is 1°C ~ 20°C.
For maximum performance, shake it well before use.
After applying the coating agent on a soft cloth evenly, coat the surface and wipe off excessive amount of agent using a soft towel.
Be careful not to let it smudge as a spot an unintended area.
Be cautious! Failure to observe the time to wipe off excessive amount of agent will cause uneven coating or smudge. In such a case, however, re-apply the same agent on the smudged area and wipe off excessive agent with a soft towel.
When the stain is not removed easily, it can be removed by applying steam.